节点文献

130t钢包底吹氩喷嘴布置模式优化的水模型试验

Experiment on Optimum Location of Bottom Nozzle in an 130 t Argon Stirred Ladle by Water Model

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 幸伟倪红卫沈巧珍张华何环宇

【Author】 Xing Wei Ni Hongwei Shen Qiaozhen Zhang Hua He Huanyu (Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education,Wuhan University of Science and Technology,Wuhan 430081)

【机构】 武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室 武汉 430081武汉 430081

【摘要】 通过建立的130 t钢包水力学模型,用电导法测定了单喷嘴、双喷嘴垂直分布和对称分布时不同供气量下钢水混匀时间。结果表明,双喷嘴喷吹的混匀时间较单喷嘴的混匀时间短,搅拌效果优于单喷嘴。单喷嘴底吹氩,喷嘴距钢包底部中心0.55R(钢包底半径)时混匀时间最短;双喷嘴间距由0.40R增至0.70R时混匀时间明显减少。

【Abstract】 The mixing time of steel in an 130 t ladle with single nozzle blowing,double nozzle blowing in right angle location and symmetry location with different gas rate was measured by established water model using conductivity method. Results showed that the mixing time with double nozzle blowing was shorter than that with single nozzle blowing and stirring effect was better than that of single nozzle blowing.As nozzle location distance from center of ladle bottom for single nozzle blowing was 0.55R(ladle bottom radius),the mixing time was shortest;and as distance between double nozzle for double nozzle blowing increased from 0.40R to 0.70R,the mixing time obviously decreased.

【关键词】 钢包底吹氩搅拌水模型混匀时间
【Key words】 LadleBottom Argon StirringWater ModelMixing Time
【基金】 湖北省教育厅科研基金(编号2004BC13)
  • 【分类号】TF769
  • 【被引频次】35
  • 【下载频次】319
节点文献中: 

本文链接的文献网络图示:

本文的引文网络