节点文献

APG工艺用环氧树脂体系的固化及流变模型

Cure kinetics and chemorheological model of epoxy resin mixture used in APG process

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张赛军袁宁阮锋

【Author】 Zhang Saijun Yuan Ning Ruan Feng (College of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China)

【机构】 华南理工大学机械工程学院华南理工大学机械工程学院 广东 广州510640广东 广州

【摘要】 研究了自动压力凝胶工艺用环氧树脂混合体系在动态升温过程中的固化反应,采用Malek法确定了动力学模型并预测了相应的参数。该体系符合两参数自催化SB模型。用旋转流变仪测定了该体系在动态升温过程中黏度相对于温度的变化曲线,采用WLF和Macosko混合方程描述该体系的化学流变模型,用非线性拟合方法预测了模型中的参数。模型预测与实验数据比较吻合。

【Abstract】 This paper studied curing reaction of epoxy resin blended system in dynamic temperature-rise course, which was available in automatic pressure gelation technology(APG).Malek process was adopted to determine the kinetic model of the system in APG and forecasted the corresponding parameters.The results reveal that the system conforms to two-parameter autocatalytic SB model.The variation curve of the system’s viscosity with temperature in the dynamic temperature-rise course is measured with a rotary rheometer.The chemorheological model of the system is described with the combined WLF and Macosko equation;the parameters of the model are predicted by means of non-linear fit method.The anticipation made with the model substantially accorded with the experimental data.

【基金】 广东省工业攻关项目(2003C102023)
  • 【文献出处】 合成树脂及塑料 ,China Synthetic Resin and Plastics , 编辑部邮箱 ,2007年03期
  • 【分类号】TQ323.5
  • 【被引频次】12
  • 【下载频次】256
节点文献中: 

本文链接的文献网络图示:

本文的引文网络