节点文献

AZ31B薄板手机外壳温冲试验研究

Experimental study on the warm-stamping for AZ31 magnesium alloy shell of mobile phone

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 万玉刚康永林吕保义王朝辉蔡庆伍张济山

【Author】 WAN Yu-gang~1 KANG Yong-lin~1 LY Bao-yi~1 WANG Zhao-hui~1 CM Qing-wu~2 ZHANG Ji-shan~2 (1.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China; 2.State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China)

【机构】 北京科技大学材料学院北京科技大学新金属材料国家重点实验室北京科技大学新金属材料国家重点实验室 北京100083北京100083

【摘要】 通过对AZ31B镁合金手机壳的温冲试验研究,分析了凸、凹模温度、镁板温度和加热时间、冲压速度以及润滑条件对成形结果的影响。试验表明,在保证坯料充分退火和模具结构合理的前提下,拉深凸模温度保持在230℃,凹模及压边圈温度保持在280~320℃,用石墨对坯料凸缘和压边圈、凹模肩部进行有效润滑,同时,施加合适的压边力作用,便可以成功地冲压出镁合金壳形件。

【Abstract】 Through the investigation on the stamping for the AZ31 magnesium alloy shell of mobile phone,the effects of the temperature of punch,die and sheet,distortion velocity,and lubricating agent on the formability were analyzed. The results show that,with sufficient annealing,proper die structure parameters and proper blank holding force, keeping the punch at 230℃,die and blank at 280~320℃,using the graphite to lubricate the blank and the shoulder part of die,the shell of the magnesium alloy can be obtained successfully.

【关键词】 AZ31B手机壳温冲成形性
【Key words】 AZ31mobile phone shellwarm stampingformability
【基金】 教育部科技创新工程重大项目培育资金项目资助(704900)
  • 【文献出处】 锻压技术 ,Forging & Stamping Technology , 编辑部邮箱 ,2007年06期
  • 【分类号】TG386
  • 【下载频次】213
节点文献中: 

本文链接的文献网络图示:

本文的引文网络