节点文献
水韧处理对含硼高锰钢组织和性能的影响
The Effect of Water Toughening Treatment on Structure and Properties of High Manganese Steel with Trace Boron
【摘要】 在1020~1140℃温度范围内,随水韧处理温度的升高,保温时间越长晶粒越粗大;硬度变化范围HBS212~216,而冲击韧性随着温度的升高而增加,达到最大值后随温度升高而降低;在1110℃时,试样HBS215,αK=179J/cm2,且试样金相组织中奥氏体已转变完全,晶粒度达到5~6级。
【Abstract】 In a temperature range of 1 020~1 140 ℃, the higher the water toughening temperature and the longer the holding time, the coarser the grains; the variation range of hardness is HBS 212-216, however, the impact toughness increases with the increase of temperature at first, then it will decrease after its value up to maximum. When the temperature of water toughening is 1 110 ℃, the hardness of the sample is HBS 215; ak=179 J/cm2; the grain size achieves 5-6 level and the austenite transformation in the microstructures of the samples will be finished completely.
【关键词】 含硼高锰钢;
水韧处理;
冲击韧性;
晶粒度;
【Key words】 high manganese steel containing boron added in; water toughening; impact toughness; grain size;
【Key words】 high manganese steel containing boron added in; water toughening; impact toughness; grain size;
【基金】 国家自然科学基金和上海宝钢集团公司联合资助(530374024);辽宁省科技厅资助项目(200221007)。
- 【文献出处】 铸造 ,Foundry , 编辑部邮箱 ,2005年12期
- 【分类号】TG113
- 【被引频次】12
- 【下载频次】212