节点文献

静电悬浮加速度计敏感结构的热噪声分析

ANALYSIS OF THE THERMAL NOISE OF THE E LECTROSTATIC SUSPENDED ACCELEROMETER’S SENSOR

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 王佐磊薛大同唐富荣

【Author】 WANG Zuo -lei,XUE Da -tong ,TANG Fu -r ong(Lanzhou Institute of Physics,Lanzh ou 730000,China)

【机构】 兰州物理研究所兰州物理研究所 甘肃兰州730000甘肃兰州730000甘肃兰州730000

【摘要】 分析了影响静电悬浮加速度计分辨率的辐射计效应、热辐射压力、气体黏滞阻力3种热加速度噪声的产生机理,定量分析了一定条件下3种热噪声的影响,提出了通过温控减小加速度计质量块周围的温度梯度,以及提高加速度计敏感结构内部真空度等措施,以减小加速度计的热噪声。对用于低低卫-卫跟踪(SST-LL)重力测量的静电悬浮加速度计(其在10-4~10-1Hz的测量频带内精度为1×10-9m·s-2/Hz),如果加速度计敏感结构内部的真空度为5×10-4Pa,则敏感结构周围的温度噪声必须控制在0.25K/Hz以内。

【Abstract】 The thermal noise sources from the accelerometer’ s sensor unit,such as radiometer eff ect,radiation pressure and residual gas damping were investigated.Their effect on the accelero meter’ s resolution was analyzed.Two methods were presented to reduce the thermal nois es.One is to stabilize the temperatu re around the sensor unit,the other i s to lower the inner gas pressure.To meet the resolution of1×10 -9 m·s -2z within the bandwidth from 10 -4 Hz to 10 -1 Hz,the temperature noise must be controlle d to lower tha/Hz if the gas pressure inside the sensor is 5×10 -4 Pa.

  • 【文献出处】 真空与低温 ,Vacuum and Cryogenics , 编辑部邮箱 ,2005年02期
  • 【分类号】TH824.4
  • 【被引频次】18
  • 【下载频次】290
节点文献中: 

本文链接的文献网络图示:

本文的引文网络