节点文献

基于一维相控阵引信的起爆控制算法研究

Research of Burst Control Algorithm Basing on One-Dimension Phased-Array Fuze

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘剑锋; 庄志洪; 陈潜;

【Author】 LIU Jian-feng1, ZHUANG Zhi-hong1, CHENG Qian2 (1. Nanjing University of Science & Technology, Electronic Engineering Department, Nanjing 210094,China; 2. Shanghai 802 Institute of Aerospace Office, Shanghai 200090,China)

【机构】 南京理工大学电子工程与光电技术学院; 上海航天局802研究所 南京210094; 南京210094; 上海200090;

【摘要】 工程上实现最佳引战配合要求导弹战斗部最大破片密度方向瞄准目标要害部位。基于一维相控阵引信的波束控制技术,推导了最佳起爆角和起爆延时算法,并研究了一种改进卡尔曼滤波方法在此算法中的应用。该滤波算法将球坐标系中导弹导引头的测量信息转换到直角坐标系下进行滤波,同时消除了由于坐标转换而引起的偏差。仿真结果表明,该滤波算法的应用能得到很高的最佳起爆角和起爆延时估计精度。

【Abstract】 Optimal fuze coordinate warhead in engineering demands the maximum fraction density direction should aim at target’s key position. Based on beam control technology of one-dimension phased-array fuze, the paper deduced the optimal burst angle and burst delay algorithm and researched an improved Kalman algorithm. The algorithm filtered the information which was converted from polar coordinates to rectangle coordinates. At the same time, it eliminated the divergence caused by coordinate transform. Simulation results indicated that the application of this Kalman filter can get the high estimation precision of optimal burst angle and burst delay.

  • 【文献出处】 宇航学报 ,Journal of Astronautics , 编辑部邮箱 ,2005年04期
  • 【分类号】TJ430
  • 【被引频次】6
  • 【下载频次】113
节点文献中: 

本文链接的文献网络图示:

本文的引文网络