节点文献

烟支密度与烟支重量、吸阻、硬度及标准偏差的关系

Relationships of Tobacco Rod Density with Standard Deviations of Weight, Draw Resistance and Hardness

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 赵同林李兵役田兴友杨帆

【Author】 ZHAO TONG_LIN, LI BING_YI, TIAN XING_YOU, and YANG FANWuhan Cigarette Factory, Wuhan 430051, China

【机构】 武汉卷烟厂武汉卷烟厂 武汉市汉阳区十升路特5号430051武汉市汉阳区十升路特5号430051武汉市汉阳区十升路特5号430051

【摘要】 为找出烟支密度对烟支重量、吸阻及硬度在不同目标值下的稳定性关系,选择不同类别的卷烟在不同烟支密度条件下进行了试验研究。结果表明:二类以上卷烟适宜的烟支密度为235mg/cm3 左右;三类卷烟适宜的烟支密度在230~235mg/cm3 之间;四类卷烟的烟支密度在230mg/cm3 时相应的烟支重量和吸阻的标准偏差较低。烟支密度在一定范围内变化对烟支硬度的影响不大。

【Abstract】 In order to find out the relationships of tobacco rod density with the stability of weight, draw resistance and hardness, the weight, draw resistance and hardness of different grades of cigarette with different tobacco rod density were tested. The results showed that the standard deviations of cigarette weight and draw resistance were lower when the tobacco rod densities of cigarette of grades Ⅰ, Ⅱ, Ⅲ and Ⅳ were about 235, 235, 230~235, and 230 mg/cm 3, respectively. The hardness of cigarette was affected slightly by the change of tobacco rod density in certain range.

【关键词】 烟支密度重量吸阻硬度标准偏差
【Key words】 CigaretteDensityWeightDraw resistanceHardnessStandard deviation
  • 【文献出处】 烟草科技 ,Tobacco Science & Technology , 编辑部邮箱 ,2005年04期
  • 【分类号】TS452
  • 【被引频次】28
  • 【下载频次】384
节点文献中: 

本文链接的文献网络图示:

本文的引文网络