节点文献

小动力旋挖钻机用嵌岩短螺旋钻头结构形式的改进

Improvement on Structural Patterns of Rock Inserted Bits with Short Screw

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘南昌胡继良黄玉文翁炜张宏智

【Author】 LIU Nan-chang, HU Ji-liang, HUANG Yu-wen, WENG Wei, ZHANG Hong-zhi (Beijing Institute of Exploration Engineering, Beijing 100083, China)

【机构】 北京探矿工程研究所北京探矿工程研究所 北京100083北京100083北京100083

【摘要】 采用小动力无加压旋挖钻机在粒径较大的卵砾石地层和泥页岩地层中进行 1500mm以上大口径钻孔灌注桩施工,由于钻机动力小且不能加压,用常规嵌岩短螺旋钻头钻进出现进尺慢或不进尺现象。通过对河南西峡县宛西制药责任有限公司新厂房桩孔施工过程中出现此种现象的分析和处理,提出了嵌岩短螺旋钻头针对性的改进措施,并取得了良好效果。

【Abstract】 When small powered rotary rigs drill in mudstone,shale and big particle gravel with a diameter of 1,500mm for bored piles, the conventional inserted rock screw bits often present themselves slow penetration or even no penetration due to the rig’s small power and small WOB. Through analyses on these problems occurred during bored pile construction for new plant building of Wanxi Pharmacy Limited Company in Xixia County, Henan, pertinent improvement measures were put forward and the good results were got.

  • 【文献出处】 探矿工程(岩土钻掘工程) ,Exploration Engineering (Drilling & Tunneling) , 编辑部邮箱 ,2005年02期
  • 【分类号】P634.4
  • 【被引频次】6
  • 【下载频次】141
节点文献中: 

本文链接的文献网络图示:

本文的引文网络