节点文献

示波极谱法测定轻质油品中元素硫含量应注意的问题

PAYING ATTENTION TO THE DETERMINATION OF ELEMENTAL SULFUR IN LIGHT DISTILLATES BY OSCILLOSCOPIC POLAROGRAPHY

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张红霞吴明清黄燕民

【Author】 Zhang Hongxia, Wu Mingqing, Huang Yanmin (Research Institute of Petroleum Processing, Beijing 100083)

【机构】 石油化工科学研究院石油化工科学研究院 北京100083北京100083北京100083

【摘要】 研究了在示波极谱法测定喷气燃料中元素硫含量的过程中,几种不同类型硫化物对测定结果的影响。结果表明,质量分数在300μg/g以上的硫醇硫严重干扰测定结果,30~300μg/g的硫醇硫对测定结果影响较大,30μg/g以下的硫醇硫和其它类型硫化物对测定结果影响不大。因此,当样品中硫醇硫质量分数高于30μg/g时,必须先将硫醇转化或脱除,再进行元素硫的测定。

【Abstract】 Investigation in the interference of different kinds of sulfide with the determination of elemental sulfur in jet fuel was carried on by oscilloscopic polarography. Results showed that when the mercaptan content in jet fuel was in the range of over 300μg/g, between 30-300μg/g, and below 30μg/g, the measuring result was seriously interfered, interfered and basically not interfered, respectively. Other kinds of sulfide, such as ethyl thioether, 2-methylthiophene, 2-ethylthiophene etc. offered no interference. Therefore, to ensure the measuring accuracy when mercaptan content in sample is over 30μg/g, pretreatment is required to transform or remove the mercaptan.

【关键词】 馏分油喷气燃料极谱法元素分析
【Key words】 distillatejet fuelpolarographysulfurelemental analysis
  • 【文献出处】 石油炼制与化工 ,Petroleum Processing and Petrochemicals , 编辑部邮箱 ,2005年04期
  • 【分类号】TE622.1
  • 【被引频次】6
  • 【下载频次】106
节点文献中: 

本文链接的文献网络图示:

本文的引文网络