节点文献

聚铁改性絮凝剂的合成与水处理试验

Synthesis of modified polyferric sulfate for polymeric ferric sulfate silicate(PFSS) and water treatment test

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张文艺郑明东李琴方蔡霞

【Author】 ZHANG Wen-yi~(1,2),ZHENG Ming-dong~1,LI Qin~2,FANG Cai-xia~1(1. Environment Department of Anhui University of Technology, Ma’nshan, Anhui 243002, China; 2. State Key Laboratory of Pollution Control and Resource Reuse, School of Environment, Nanjing University, Nanjing, Jiangsu 210093, China)

【机构】 安徽工业大学环境工程系,安徽工业大学环境工程系,污染控制与资源化研究国家重点实验室,安徽工业大学环境工程系 马鞍山243002污染控制与资源化研究国家重点实验室,南京大学环境学院,南京210093,马鞍山243002,南京大学环境学院,南京210093,马鞍山243002

【摘要】 研究了一种通过用聚铁改性来制备聚硅酸硫酸铁的方法,考察了改性剂中的SiO2质量分数、铁硅比、活化时间、pH值等参数对PFSS(聚硅酸硫酸铁)性能的影响,并进行了水处理实验。结果表明,PFSS制备适宜参数条件为SiO2质量分数为2.0%、铁硅比10∶1、活化时间4.0h,此时其对原水中的浊度和高锰酸盐指数去除率可分别达到98.4%~72.4%,处理后的原水达到饮用水的水质要求。

【Abstract】 In this paper, a method of modified polyferric sulfate for polymeric ferricfate silicate(PFSS) flocculants and water treatment test were conducted. The influence of w(SiO2%),n(Fe)/n(Si), silicic acid activated time and pH value on the characteristics of PFSS were investigated. The results show that the optimum synthesizing parameters of PFSS are: w(SiO2%)=2.0%, n(Fe)/n(Si)=10∶1, silicic acid activated time=4hours, and the removal ratio of turbidity, permanganate index were up to 90%,60% respectively, and the treated water can meet the demand of Water Quality Standard for Drinking Water Sources (CJ 3020-1993).

【基金】 安徽省教育厅自然科学基金(2004KJ067,2005KJ033);安徽省优秀青年教师资助项目(2003jq132)
  • 【文献出处】 水文地质工程地质 ,Hydrogeology and Engineering Geology , 编辑部邮箱 ,2005年05期
  • 【分类号】TU991.2
  • 【被引频次】3
  • 【下载频次】212
节点文献中: 

本文链接的文献网络图示:

本文的引文网络