节点文献

从含铁硫酸铝中除铁

Removing of Iron from Aluminum Sulfate Solution

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 吴建宁蔡会武郭红梅顾兴林

【Author】 WU Jian-ning,CAI Hui-wu,GUO Hong-mei,GU Xing-lin(Department of Chemistry and Chemical Engineering,Xi’an University of Science and Technology,Xi’an,Shaanxi710054,China)

【机构】 西安科技大学化学与化工系西安科技大学化学与化工系 陕西西安710054陕西西安710054陕西西安710054

【摘要】 利用高锰酸钾作氧化剂对含铁硫酸铝溶液进行除铁试验研究,探讨了溶液pH、氧化剂用量、硫酸铝溶液浓度等因素对除铁效率的影响。试验确定的最佳的除铁工艺条件为:溶液pH为3.0,溶液中硫酸铝质量分数为30%,反应时间15 min,反应温度(100±5)℃。产品中铁质量分数可降至0.27%。用X射线衍射表征了产品结构。

【Abstract】 The process of removing iron from aluminum sulfate solution using KMnO4 as oxidant was studied. The influence of pH value,dosage of oxidant,concentration of aluminum sulfate solution on removing iron were studied. The obtained optimum conditions were that the pH value is controlled at 3, mass fraction of aluminum sulfate in solution is 30%, reaction time is 15 minute, reaction (temperature) is (100±5) ℃.The mass fraction of iron in aluminum sulfate product can be decreased to (0.27)%. Structure of the product was characterized by X-ray diffraction.

【关键词】 含铁硫酸铝高锰酸钾去除
【Key words】 aluminum sulfateKMnO4ironremoving
  • 【文献出处】 湿法冶金 ,Hydrometallurgy of China , 编辑部邮箱 ,2005年03期
  • 【分类号】TQ125.14
  • 【被引频次】39
  • 【下载频次】502
节点文献中: 

本文链接的文献网络图示:

本文的引文网络