节点文献

超声波驱动的摩擦特性研究

Research on Friction Properties of Ultrasonic Drive

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 罗云霞曲建俊徐晓希

【Author】 Luo Yunxia1 Qu Jianjun1 Xu Xiaoxi2 (1.School of Mechatronics Engineering,Harbin Institute of Technology,Harbin 150001,China; 2.Mechanical & Power Engineering College,Harbin University of Science and Technology,Harbin 150080,China)

【机构】 哈尔滨工业大学机电工程学院哈尔滨理工大学机械动力学院 黑龙江哈尔滨150001黑龙江哈尔滨150001黑龙江哈尔滨150080

【摘要】 采用自制的模拟超声马达定子齿椭圆振动的超声驱动模拟试验装置,研究了接触预压紧力和两相超声波振动的激励电压峰峰值之比对超声驱动的摩擦特性的影响。结果表明在超声波振动驱动条件下,每一种摩擦材料都存在最佳的预压紧力和激励电压的组合。

【Abstract】 The effects of contact load and ratio of peak-peak amplitude of two-phase excitation voltage used for ultrasonic vibration on friction properties of ultrasonic drive were studied by using simulated tester of ultrasonic drive,by which the vibration ellipse of stator tooth of ultrasonic motor can be simulated.The results of research show that for each friction material there is the most optimum combination of contact load and excitation voltage under the condition of ultrasonic vibration driving.

【关键词】 超声马达摩擦驱动摩擦
【Key words】 ultrasonic motorfriction drivefriction
【基金】 哈尔滨工业大学跨学科交叉性研究基金项目(HIT.MD2002.08);黑龙江省自然科学基金项目(E9814);黑龙江省博士后启动基金资助项目.
  • 【文献出处】 润滑与密封 ,Lubrication Engineering , 编辑部邮箱 ,2005年03期
  • 【分类号】TM359.9
  • 【被引频次】7
  • 【下载频次】225
节点文献中: 

本文链接的文献网络图示:

本文的引文网络