节点文献

浸没燃烧蒸发过程单个气泡传热传质模型

Heat and mass transfer modeling of a single bubble during submerged combustion evaporation

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 聂永丰岳东北许玉东刘建国金宜英

【Author】 NIE Yongfeng, YUE Dongbei, XU Yudong, LIU Jianguo, JIN Yiying(Department of Environmental Science and Engineering, Tsinghua University, Beijing 100084, China

【机构】 清华大学环境科学与工程系清华大学环境科学与工程系 北京100084北京100084北京100084

【摘要】 浸没燃烧蒸发器是一种利用高温气体与低温液体直接接触传热的高效蒸发设备,其现有传热传质模型较为繁琐。该文从传质推动力角度出发建立了高温气泡在水中上升过程的传热传质模型,计算结果与文献报道的实验数据、模拟结果基本吻合。利用该模型计算可得出,浸没燃烧蒸发过程中,液体平衡温度随气体初始温度的升高或气泡内初始水蒸汽含量的增大而升高,接触时间在一定范围内的增加使得液体平衡温度随之降低,超出1 s后对液体平衡温度影响不大。

【Abstract】 The submerged combustion evaporator is a high-efficiency equipment using direct contact heat transfer between superheated bubbles and the liquid. The mass transfer force concept was used to develop a model for the heat and mass transfer from a single superheated bubble rising in the water pool. The results agree well with experimental data. The results also show that during submerged combustion evaporation, the steady-state liquid temperature increases with the increasing initial gas temperature or with increasing initial water-vapor content in the superheated bubble. Increases of the direct contact time of up to 1 s reduce the steady-state liquid temperature, but have little influence on the steadystate liquid temperature beyond 1 s.

【基金】 清华大学博士生科研创新基金项目
  • 【文献出处】 清华大学学报(自然科学版) ,Journal of Tsinghua University(Science and Technology) , 编辑部邮箱 ,2005年09期
  • 【分类号】TQ021.4;
  • 【被引频次】20
  • 【下载频次】570
节点文献中: 

本文链接的文献网络图示:

本文的引文网络