节点文献

黄土地区公路工程地基承载力分区计算方法

Calculation method of foundation bearing capacity based on division in loess area for highway engineering

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 石刚王晋国支喜兰刘怡林张建林徐世强

【Author】 Shi Gang~(1,2),Wang Jin-guo~1,Zhi Xi-lan~2,Liu Yi-lin~3,Zhang Jian-lin~4,Xu Shi-qiang~1(1.School of Science,Chang’an University,Xi’an 710064,China;2.School of Highway,Chang’an University,Xi’an 710064,China;3.Research Institute of Highway of Ministry of Communications,Beijing 100088,China;4.Department of Construction Management,Chang’an University,Xi’an 710064,China)

【机构】 长安大学理学院长安大学公路学院交通部公路科学研究所长安大学基建处长安大学理学院 陕西西安710064陕西西安710064北京100088

【摘要】 公路黄土地基承载力的评价主要借鉴建筑、铁路等行业的评价经验,以整个黄土地区为单元,给出一个推荐公式或承载力表,已不能满足公路工程的要求。以大量黄土地区实测载荷试验为基础,按照承载力把黄土地区分为四个区,每个区都建立了承载力与含水量、液限、孔隙比之间的非线性回归关系式。用这一套回归关系式确定的黄土承载力相对误差小于10%,与规范方法相比较,精度显著提高。同时对承载力分别按路基的宽度、相对变形以及刚柔荷载进行修正,给出了承载力设计值的修正公式。

【Abstract】 The foundation bearing capacity evaluation of highway engineering in loess area mainly relies on the evaluation standards of architecture,railway and other similar fields,they only provide a formula or bearing capacity table based on whole loess area,which can not meet the needs of highway engineering.Based on analyzing the data of actual plate loading test,the loess areas were divided into four sections according to their bearing capacities,the nonlinear regression relationship formulas were established between loess foundation bearing capacities and water content,liquid limit,void ratio.Applied result shows that the relative errors of the bearing capacities computed by the formulas are less than 10%,compared with other standard methods,the formulas are feasible.Meanwhile,the formulas are revised according to the width,relative distortion,rigidity and flexibility of subgrade.8 tabs,4 figs,8 refs.

【基金】 国家西部交通建设科技项目(200131822316)
  • 【文献出处】 交通运输工程学报 ,Journal of Traffic and Transportation Engineering , 编辑部邮箱 ,2005年04期
  • 【分类号】U416.1
  • 【被引频次】22
  • 【下载频次】245
节点文献中: 

本文链接的文献网络图示:

本文的引文网络