节点文献

甚高压合成条件对原位聚合聚苯胺薄膜导电性能的影响

The Effect of Very High Pressure Used in Synthesis on the Electrical Property of in Situ Polymerized Polyaniline Films

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李冀蜀; 顾大伟; 沈临江; 杨南如;

【Author】 LI Ji-shu~(1,2),GU Da-wei~1,SHEN Lin-jiang~1, YANG Nan-ru~2(1.School of Sciences,Nanjing University of Technology,Jiangsu Nanjing 210009 PRC; 2.School of Material Sciences, Nanjing University of Technology,Jiangsu Nanjing 210009 PRC)

【机构】 南京工业大学理学院; 南京工业大学材料学院 江苏南京210009; 南京工业大学材料学院; 江苏南京210009; 江苏南京210009;

【摘要】 在不同压力条件下用原位聚合法制备了导电聚苯胺薄膜。发现在150MPa~600MPa的甚高压条件下合成的薄膜样品均具有网络状表面形貌,且样品的紫外吸收光谱随压力的增加出现红移现象。实验结果表明样品分子的共轭长度和分子链间的电接触在高压情况下有所增强。这一结论通过引入约化电导率的分析得到进一步证实。

【Abstract】 The conducting PANI films were synthesized by in situ polymerization under various high pressures.Between the applied pressure range of 150 and 600 MPa, the samples exhibited the network morphology and a Red-shift in UV-visible spectrum as increasing pressure. It was concluded that the conjugate length of the chains in PANI films and the electrical contact between the chains were improves. By using a normalized conductivity, such a conclusion was confirmed further.

【基金】 国家自然科学基金项目(10374053)。
  • 【分类号】O484.42
  • 【下载频次】60
节点文献中: 

本文链接的文献网络图示:

本文的引文网络