节点文献

ECAP条件下纯铝的应变行为模拟研究

Simulation of Strain/Stress field in ECAP processed pure aluminium

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 黄震威曹湛武保林王洪顺

【Author】 HUANG Zhenwei\+1 CAO Zan\+2 WU Baolin\+1 WANG Hongsun\+1 (1.Material Engineering Department, Shenyang Institute of Aeronautical Engineering, Liaoning Shenyang, 110034; 2.Superfine Powder Industry, Anshan Iron and Steel Company,Liaoning Anshan 114000)

【机构】 沈阳航空工业学院材料工程系鞍山钢铁公司实业微细铝粉厂沈阳航空工业学院材料工程系 辽宁沈阳110034辽宁鞍山114000辽宁沈阳110034

【摘要】 利用MSC.MARC软件对铸造常态纯Al在ECAP条件下的大变形行为进行了初步的模拟计算工作。通过模拟,可以确定以MARC来模拟材料的力学行为是可行的,关键是材料模型的设计;MARC的模拟结果是可信的。对直角ECAP模具的模拟结果表明,大的剪切应变主要发生在模具的直角拐角附近;且偏向于出料口;下直角处的剪切应变要明显大于他处;最大剪切变形量的连线与底面近似成 45°。

【Abstract】 The primary enormous deformation behavior simulation of pure Al processed by ECAP has been studied using MSC. MARC. It’s feasible that the simulation is done by MARC. The crux of this method is the design of the material model. According to the right-angle type die, it’s hereabout the bottom right-angle cornor of the die, partial to the discharge end, that the emormous deformation has been done. The detrsion on the bottom right-angle cornor is in evidence greater than other. The include angle between the link of the max shearing deformation and the bottom line is close to 45℃.

【关键词】 MARCECAP模拟计算大剪切应变
【Key words】 MARCECAPsimulationhigh strain
  • 【文献出处】 沈阳航空工业学院学报 ,Journal of Shenyang Institute of Aeronautcal Engineering , 编辑部邮箱 ,2005年01期
  • 【分类号】TG376
  • 【被引频次】3
  • 【下载频次】159
节点文献中: 

本文链接的文献网络图示:

本文的引文网络