节点文献

SACTIG与VPTIG电弧稳定性的比较分析(一)

Study on arc stability of SACTIG and VPTIG(Ⅰ)

推荐 CAJ下载
PDF下载
不支持迅雷等下载工具，请取消加速工具后下载。

【Author】 FANG Chen-fu~ 1,2 , CHEN Shu-jun~1, LIU Jia~1, YIN Shu-yan~1, SONG Yong-lun~1, LI Huan~3, HOU Run-shi~4, WEN Yong-ping~2(1.College of Mechanical Engineering & Applied Electronics Technology,Beijing University of technology,Beijing 100022, China; 2.Provincial Key Laboratory of Advanced Welding Technology,Jiangsu University of Science and Technology, Zhenjiang Jiangsu 212003, China; 3. Material College,Tianjing University,Tianjing 300072, China; 4. Department of Mechnical Engineering,Tsinghua University, Beijing 100084, China).

【机构】北京工业大学机电学院；天津大学材料学院；清华大学机械系；江苏科技大学先进焊接技术省级重点实验室北京100022；江苏科技大学先进焊接技术省级重点实验室；江苏镇江212003；北京100022；天津300072；北京100084；

【摘要】采用高速录像系统、焊接电弧分析仪同步实时采集SACTIG(sine alternative cur-rent TIG)与VPTIG(variable polarity TIG)焊接电流、电弧电压、电弧形态信息。比较分析了SACTIG与VPTIG焊在焊接电流过零期间,焊接电弧稳定性与相关参数之间的关系。研究表明,工频正弦交流TIG电弧电流过零期间可能会发生熄弧和再引弧现象。焊接电流增加到一定值时,就可消除熄弧和再引弧现象,使工频正弦交流TIG电弧也具有良好的电弧稳定性。再引弧电压越高,电弧稳定性越差;再引弧电压等于电弧电压,就不会发生熄弧和再引弧现象。更多还原

【Abstract】 The welding current, arc voltage and shape of SACTIG and VPTIG welding were collected by high-speed camena system and welding arc analyzer. The relation betwenn welding are stabklity and associated parameters during the passing zreo time of SACTIG and VPTIG welding current was analyzed. The studied results indicated that (50Hz) SACTIG arc may go out and reignite during changing polarity. While welding current increase to a threshold the arc will not go out. The higher reignition voltage will caused the longer arc going out, so the arc stability becomes worse. If reignition voltage is equal to arc voltage, the arc will not go out.更多还原

【关键词】 SACTIG； VPTIG；电弧；稳定性；
【Key words】 SACTIG； VPTIG； arc； stability；

【基金】船舶行业国防预研基金项目,项目编号:98.J56.2.2(1);江苏省高新技术研究项目项目编号:(2142X1C033)

【文献出处】焊接学报 ,Transactions of the China Welding Institution , 编辑部邮箱 ,2005年12期

【分类号】TG444
【被引频次】5
【下载频次】241

知网节下载

节点文献中：

本文链接的文献网络图示:

本文的引文网络

节点文献