节点文献

外循环三相流化床污水处理特性的研究

Characterization of wastewater treatment using external circulating three-phase bio-fluidized bed

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 焦伟堂冯旭东李丽

【Author】 Jiao Weitang1 Feng Xudong1 Li Li2(1.College of Chemical and Environmental Engineering,Beijing Technology and Business University,Beijing 100037;2. Yinhe Paper Group, Linqing Shandong 252600)

【机构】 北京工商大学化学与环境工程学院银河纸业集团 北京100037北京100037山东临清252600

【摘要】 采用三相外循环生物流化床处理生活污水。该设备包含好氧区和缺氧区,可获得足够的停留时间造成缺氧条件,能保证有效去除NH3N。实验在室温下进行,进水条件pH为7~8,CODCr为286~656mg/L,NH3N为10~51mg/L。结果显示,控制水力停留时间在3h为宜,最佳通气量为0.09m3/h,此时CODCr和NH3N的去除率分别达91%和96.6%,有较好的处理效果。同时实验确定了最佳膜厚为145μm。

【Abstract】 An innovative apparatus-external circulating three-phase biological fluidized bed was used to treat an organic wastewater. This apparatus includes both aerobic zone and anoxic zone. As it has enough retention time for anoxia process, a satisfactory removal of NH3-N can be obtained under the conditions of CODcr and pH in influents of 286~656 mg/L and 78 and NH3-N of 10~51 mg/L at room temperature. The influence of the process parameter of apparatus on the treatment was studied. The results showed that the optimum conditions were HRT 3 h and ventilation quantity 0.09 m3/h. The removal of CODcr and NH3-N were 91% and 96.6% respectively. The best thickness of the biofilm was found to be 145 μm.

  • 【文献出处】 环境污染与防治 ,Environmental Pollution & Control , 编辑部邮箱 ,2005年03期
  • 【分类号】X703
  • 【被引频次】5
  • 【下载频次】193
节点文献中: 

本文链接的文献网络图示:

本文的引文网络