节点文献

ZnO纳米棒的低温湿化学制备

Synthesis of ZnO nanorods by wet-chemical method at low temperature

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘秀兰李佳赵晓鹏

【Author】 LIU Xiu-lan,LI Jia,ZHAO Xiao-peng (Institute of Electrorheological Technology,Department of Applied Physics, Northwestern Polytechnic University,Xi’an 710072 China)

【机构】 西北工业大学电流变技术研究所西北工业大学电流变技术研究所 陕西西安710072陕西西安710072陕西西安710072

【摘要】 在低温反应条件下,通过超声的方法,以DBS作为表面活性剂,制备了ZnO纳米棒。化学反应的低温条件由冰水浴提供,温度为0~5℃。扫描电子显微镜和光学显微镜观察表明,所制备的纳米棒形状均一,截面为六方型,直径100nm,长度1μm; X 射线衍射表征指出所得到的纳米棒为六方晶型。同时,我们也研究了反应温度、表面活性剂含量、超声、回流时间对ZnO纳米棒形貌的影响。与其它制备方法相比,低温与超声技术可以更为方便获得分布均一,长径比较小的ZnO纳米棒。

【Abstract】 At low temperature the ZnO nanorods were synthesized by the refluxing method in the presence of DBS(Dodecyl benzene sulfonic acid sodiumsalt). The samples were characterized by SEM, optics microscopy and XRD techniques. The results showed that the ZnO nanorods were 100nm in diameter and 1μm in length. It was found that the parameters including the temperature, the content of surfactant, the ultrasonic and refluxing time had important influence on the formation of the ZnO nanorods. Compared with other methods, that used ultrasonic and low temperature conditions was key to form uniform ZnO nanorods with smaller diameter.

【关键词】 ZnO纳米棒表面活性剂低温反应超声
【Key words】 ZnO nanorodsurfactantlow temperatureultrasonic
【基金】 国家自然科学基金资助项目(50272054);国家杰出青年基金资助项目(50025207)
  • 【文献出处】 功能材料 ,Journal of Functional Materials , 编辑部邮箱 ,2005年04期
  • 【分类号】O614.24
  • 【被引频次】12
  • 【下载频次】361
节点文献中: 

本文链接的文献网络图示:

本文的引文网络