节点文献

星敏感器模型参数分析与校准方法研究

Star sensor model parameter analysis and calibration method

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 郝雪涛张广军江洁

【Author】 HAO Xue-tao, ZHANG Guang-jun, JIANG Jie (School of Instrumentation & Opto-Electronic, Bei Hang University,Beijing 100083, China)

【机构】 北京航空航天大学仪器光电学院北京航空航天大学仪器光电学院 北京100083北京100083北京100083

【摘要】 以星内角统计偏差为校准精度评价指标,分析了高解析度面阵 CMOS 星敏感器模型中主要参数,得出焦距对精度影响最大,畸变次之,主点位置影响最小。由此提出了一种星敏感器校准方案,利用高精度 2 维轴向转台和单星星光模拟器采集数据,采用最小二乘参数估计算法计算主点焦距偏差,并且用 10 参数的二维多项式基函数拟合焦平面畸变。仿真结果表明在 0.03 像素误差的噪声水平下该方案能够达到 1″精度,可以满足现代空间飞行器的高精度姿态测量要求。

【Abstract】 With the interstar angle statistical residual as an evaluation standard for accuracy calibration, the geometry parameters of a high-resolution planar-array CMOS star senor model are analyzed with a conclusion of that the influence of focal length on accuracy is the largest and then the distortion, and finally the principal point. Based on the analysis, a star sensor calibration scheme is proposed. In the scheme, data are sampled by a high-accuracy 2-D axial rotating platform and a single starlight simulator, the focal length offsets of principal point are calculated with least square parameter estimation methods, and the focal plane distortion is fitted by a 2-D polynomials of 10th degree. The simulation results show that under the noise level of 0.03 pixels error the calibration accuracy of 1 arc-second can be obtained by the scheme and it can meet the demand of high-accuracy attitude-measurement of modern space spacecrafts.

【基金】 民用航天科技预研项目资助
  • 【文献出处】 光电工程 ,Opto-electronic Engineering , 编辑部邮箱 ,2005年03期
  • 【分类号】V443
  • 【被引频次】47
  • 【下载频次】853
节点文献中: 

本文链接的文献网络图示:

本文的引文网络