节点文献

镍基微胶囊彩色复合镀层制备工艺研究

Study on The Preparation Process of Color Nickel-microcapsule Composite Coating

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李科军成旦红苏永堂曹铁华徐伟一

【Author】 LI Ke-jun~1, CHENG Dan-hong~1, SU Yong-tang~2, CAO Tie-hua~1, XU Wei-yi~1 (1. Environment and Chemical Engineering College Shanghai University, Shanghai200072, China; 2. Chemistry Department, Sciences School, Shanghai University, Shanghai200436, China)

【机构】 上海大学环境与化学工程学院上海大学理学院化学系上海大学环境与化学工程学院 上海 200072上海 200072上海 200436上海 200072

【摘要】 采用溶剂蒸发技术制备平均粒径为10μm的染色微胶囊;研究了用瓦特镀镍液电沉积彩色微胶囊复合镀层的工艺,讨论了镀液中微胶囊颗粒的含量、操作温度、pH值、阴极电流密度,对镀层中微胶囊复合含量的影响。结果表明,选择合适的工艺参数可以获得结合力强、微胶囊覆盖率超过30%的镍基彩色微胶囊复合镀层。

【Abstract】 Colored microcapsules with diameter about 10 μm were prepared by solvent vaporization; color composite coating of nickel-microcapsule was electrodeposited from a Watts electrolyte. The effects of microcapsule concentration, temperature, pH, and current density on the microcapsule content in the compound film were studied. Results showed that nickel-microcapsule composite coating with microcapsule content over more than 30 percent and better adhesion could be obtained under optimum technological condition.

  • 【文献出处】 电镀与精饰 ,Plating and Finishing , 编辑部邮箱 ,2005年01期
  • 【分类号】TQ153.12
  • 【被引频次】2
  • 【下载频次】85
节点文献中: 

本文链接的文献网络图示:

本文的引文网络