节点文献

丙烯酸树脂/TiO2有机-无机杂化材料的力学、热学和光学性能研究

Study on Mechanical, Thermal and Optical Properties of Acrylic Resin/TiO2 Organic-inorganic Hybrid Materials

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 熊明娜周树学游波武利民

【Author】 XIONG Ming-na 1, ZHOU Shu-xue 1, YOU Bo 1, WU Li-min 1,2 (1.Advanced Coatings Research Center of China Educational Ministry, Fudan University, Shanghai 200433, China; 2.College of Chemistry and Materials Science, Hubei University, Wuhan 430060, China)

【机构】 复旦大学国家教育部先进涂料工程研究中心复旦大学国家教育部先进涂料工程研究中心 上海200433上海200433上海200433湖北大学化学与材料学院湖北武汉430060

【摘要】 采用溶胶 凝胶法成功制备了均匀透明的丙烯酸树脂 TiO2 有机 无机杂化材料。通过动态力学分析仪(DMA)、电子拉力机 (InstronTester)、热失重分析仪 (TGA)和紫外可见光谱 (UV VIS)等手段表征了杂化材料的力学、热学和光学性能。结果发现丙烯酸树脂与TiO2 杂化后 ,聚合物的力学性能、热稳定性和紫外屏蔽性能均有显著提高。与原位聚合法相比 ,共混法合成该杂化材料可获得更优异的力学性能。增加丙烯酸树脂中的丙烯酸含量能显著降低相分离 ,从而使其各种性能 ,特别是力学性能得以提高。

【Abstract】 Acrylic resin/titania organic-inorganic hybrid materials were successfully prepared by sol-gel process. The mechanical, thermal and optical properties were characterized by dynamical mechanical analysis (DMA), Instron testing machine, thermogravimetric analysis (TGA/DTA) and ultraviolet-visible spectroscopy (UV-VIS), respectively. The results showed that the mechanical, thermal stability and UV shielding properties were greatly improved with titania filled in the hybrids. In comparison with in-situ polymerization, blending method could synthesize hybrids with better mechanical properties. Phase separation was reduced with more acrylic acid in systems, resulting in greatly improved properties, especially mechanical properties.

【基金】 国家 8 63计划、上海市纳米专项计划、教育部重点科技资助项目 ;高校博士点基金;教育部跨世纪优秀人才基金资助项目
  • 【文献出处】 材料科学与工程学报 ,Journal of Materials Science and Engineering , 编辑部邮箱 ,2005年02期
  • 【分类号】TB332
  • 【被引频次】35
  • 【下载频次】615
节点文献中: 

本文链接的文献网络图示:

本文的引文网络