节点文献

Al-RE-Cu-Mn-Si铸造铝合金高温性能研究

Study on High Temperature Performance of Cast Alloy Al-RE-Cu-Mn-Si

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 水丽张淑荣李红

【Author】 SHUI Li~(1,2), ZHANG Shu-rong~1,LI Hong~1(1.School of Material Science and Engineering, Shenyang University of Science and Technology, Shenyang 110168, Liaoning, China; 2.Shenyang University of Technology, Shenyang 110023, Liaoning, China)

【机构】 沈阳理工大学材料科学与工程学院沈阳理工大学材料科学与工程学院 辽宁沈阳110168沈阳工业大学材料科学与工程学院辽宁沈阳110023辽宁沈阳110168辽宁沈阳110168

【摘要】 采用SEM、EDX对Al RE Cu Mn Si铸造铝合金的高温性能进行了研究 ,分析了合金微观组织形貌特征和相的成分特点。结果表明 ,该合金在 3 5 0~ 40 0℃高温下力学性能未有明显下降 ,比一般耐热铝合金的承温能力明显偏高 ,这与合金中含有高温稳定的稀土化合物相直接相关 ,该化合物在晶界和枝晶间分布对高温塑性滑移有明显的阻碍作用

【Abstract】 The microstructure and phase components of aluminum alloy Al-RE-Cu-Mn-Si were investigated by SEM and EDX. The result shows that with increasing of temperature mechanical property at 350~400℃ decreased but not obviously, heat-resisting capacity of the alloy is higher than common heat-resisting aluminum alloy. It was found that rare earth compound phases at grain boundary and inter-dendritic distributed perform hindrance action to plastic slide.

  • 【分类号】TG113
  • 【被引频次】13
  • 【下载频次】294
节点文献中: 

本文链接的文献网络图示:

本文的引文网络