节点文献

利用取向成像研究镁合金的孪生过程

Investigation of twinning process in magnesium alloy by means of orientation mapping

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 胡轶嵩杨平赵祖德马端骋

【Author】 HU Yi-song~1, YANG Ping~1, ZHAO Zu-de~2, MA Duan-cheng~1(1. School of Materials Science and Engineering,University of Science and Technology Beijing, Beijing 100083, China;2. The 59th Institute of Chinese Weapon Industry, Chongqing 400083, China)

【机构】 北京科技大学材料科学与工程学院中国兵器工业第五九研究所北京科技大学材料科学与工程学院 北京100083北京100083重庆400083北京100083

【摘要】 利用背散射电子衍射取向成像技术,定量分析了具有初始织构的AZ31镁合金平面应变压缩时的孪生过程。结果表明:初始织构为晶粒单胞的c轴平行于轧向时,晶粒内部的{1012}孪生是主要的形变机制,产生(0001)∥轧面的基面织构。随形变量的加大及孪晶的增多,86.3°〈1120〉的孪晶取向关系先急剧增加,然后明显降低。孪晶量与基面取向晶粒的面积百分数对应,而跟孪晶关系出现的多少不相对应。测定了应变量与孪晶量的定量关系,并讨论了可能出现的误差。

【Abstract】 The twinning process in a magnesium AZ31 alloy with initial texture is quantitatively analyzed during plane-strain compression by means of orientation mapping based on EBSD technique. The results indicate that the {1012} twinning of c-axis tension is the main deformation mechanism if c-axes of most grains in initial sample are parallel to the rolling direction. The strong basal texture of <0001>∥ND will be resulted. As the strain increases, the number of twin relationship of 86.3°<1120> increases to a maximum and then reduces. It is indicated that the amount of twins is proportional to the basal-oriented grains and not to the number of twin relationship detected. A quantitative relationship of strain and twin amount is given and the related errors are discussed.

【关键词】 镁合金形变孪晶织构
【Key words】 magnesium alloydeformationtwinningtexture
【基金】 国家自然科学基金资助项目(50171009);国家高技术研究发展计划资助项目(2002AA305501)
  • 【文献出处】 中国有色金属学报 ,The Chinese Journal of Nonferrous Metals , 编辑部邮箱 ,2004年01期
  • 【分类号】TG111.7
  • 【被引频次】30
  • 【下载频次】517
节点文献中: 

本文链接的文献网络图示:

本文的引文网络