节点文献

液压联轴节外套理想弹塑性自紧应力分析

Stress Analysis of Autofrettaged Hydraulic Coupling Outer Sleeve for Ideal Elastic-plastic Materials

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 陈奇刘志刚

【Author】 CHEN Qi, LIU Zhi-gang (College of Power and Nuclear Energy, Harbin Engineering University, Harbin 150001, China)

【机构】 哈尔滨工程大学动力与核能工程学院哈尔滨工程大学动力与核能工程学院 黑龙江哈尔滨150001黑龙江哈尔滨150001

【摘要】 本文对液压联轴节外套进行了理想弹塑性自紧应力分析 ,推导出外套弹塑性自紧卸载后的残余应力公式 ,得到了全塑性自紧卸载不产生反向屈服的最佳外内径比与鲍辛格效应系数间的关系。对于理想弹塑性材料不考虑材料的鲍辛格效应 ,此最佳外内径比为 2 .2 1 8,此时自紧压力可高达 0 .8σs,是非自紧外套弹性极限压力的两倍。若鲍辛格效应系数为 0 .5 ,则最佳外内径比为 1 .5 45 ,自紧压力最高可达非自紧外套弹性极限压力的 1 .5倍。

【Abstract】 This paper performs the stress analysis of autofrettaged hydraulic coupling outer sleeve for ideal elastic-plastic materials, deduces the formula of residual stress with autofrettaged stress uninstalled, and gets relation between Bauschinger effect and the best diameter rate of no-producing reversed yield for ideal elastic-plastic materials. If Bauschinger effect of materials is not considered, the best diameter rate is 2.218, and autofrettaged pressure can be 0.8σ s, which is twice the elastic limited pressure of non-autofrettaged outer sleeve .If Bauschinger effect coefficient B is equal to 0.5, the best diameter rate is 1.545, and the highest autofrettaged pressure can be 1.5 times the elastic limited pressure of non-autofrettaged outer sleeve.

【关键词】 联轴节自紧残余应力鲍辛格效应
【Key words】 couplingautofrettageresidual stressBauschinger effect
  • 【文献出处】 中国造船 ,Shipbuilding of China , 编辑部邮箱 ,2004年02期
  • 【分类号】U664.2
  • 【被引频次】4
  • 【下载频次】81
节点文献中: 

本文链接的文献网络图示:

本文的引文网络