节点文献
EDTA辅助水热合成FeS2NiSe2复合纳米晶及其薄膜光电性质
EDTA-assisted hydrothermal synthesis of FeS2/NiSe2 nonacomposites and the optical and electrical properties of their thin films
【摘要】 以EDTA为螯合剂,加入MX2结构化合物NiSe2作为晶种,水热合成了FeS2 纳米晶 .x射线衍射分析结果表明产物为单一相黄铁矿型FeS2 (pyrite) ,平均粒径约 4 0— 5 0nm .丝网印刷成膜且高温退火后FeS2 薄膜光学直接带隙变宽 .随晶种量的增加 ,吸收边在紫外—可见光谱区红移、方块电阻升高、霍尔迁移率上升和载流子浓度下降 ,实现了n型掺杂 .并且对FeS2 的形成机理进行了讨论
【Abstract】 Nonacomposites of FeS2 was successfully synthesized by EDTA-assisted hydrothermal method, adding NiSe2 with MX2 structure as seed. Xray diffraction patterns indicate that the products are single phase FeS2 (pyrite) with the average grain size of about 48nm. FeS2 thin films were prepared by screenprinting method and annealed at high temperature. It has been shown that they have an increased direct bandgap. With increasing amount of seed, the absorbance edges in the ultravioletvisible range show a red shift; the resistance goes up; Hall mobility rises and the carrier concentration decreases. The FeS2 thin film shows an ntype semiconductor characteristic. The mechanism of the formation of FeS2 (pyrite) nanocrystalline was discussed in terms of the growth process.
【Key words】 FeS2(pyrite) nanocrystalline; hydrothermal; crystalline_induced; direct band gap;
- 【文献出处】 物理学报 ,Acta Physica Sinica , 编辑部邮箱 ,2004年10期
- 【分类号】TB383
- 【被引频次】27
- 【下载频次】356