节点文献

热处理工艺对热模锻后Ti3Al-TC11合金组织性能的影响

Influence of Technology of Heat Treatment of Ti3Al-TC11 Alloy after Hot Die Forging on Microstructures and Properties

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 毛怒涛姚泽坤刘建雄

【Author】 MAO Nu-tao,YAO Ze-kun,LIU Jian-xiong(1.Faculty of Mechanical and Electrical,Kunming University of Sci.& Tech., Kunming 650093,China; 2.Institute of Mater. Sci. & Eng.,Northwest Polytechnology University,Xi′an 710072, China)

【机构】 昆明理工大学机电学院西北工业大学材料科学与工程学院昆明理工大学机电学院 云南昆明650093陕西西安710072云南昆明650093

【摘要】 研究了热处理工艺对热模锻后 Ti3Al- TC11合金组织性能的影响。结果表明 ,热处理能够改善 Ti3Al- TC11合金组织性能 ,并对其机制进行了探讨。

【Abstract】 The influence of the technology of heat treatment on microstructures and properties of Ti3Al-TC11 alloy after hot die forging was studied.The result shows that the heat treatment is able to improve Ti3Al-TC11 alloy microstructures and properties . Its mechanism is discussed.

【关键词】 热处理Ti3Al-TC11合金
【Key words】 heat treatmentTi3Al-TC11 alloy
  • 【文献出处】 热加工工艺 ,Hot Working Technology , 编辑部邮箱 ,2004年09期
  • 【分类号】TG156
  • 【被引频次】3
  • 【下载频次】134
节点文献中: 

本文链接的文献网络图示:

本文的引文网络