节点文献

冷却速度对Al2O3/Al-Si复合材料凝固组织的影响

Effect of Different Cooling Rate on Solidification Microstructures of Alumina Short Fiber-Reinforced Al-Si Alloy Matrix Composite

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张朋娜刘政于兴哲

【Author】 ZHANG Peng-na,LIU Zheng,YU Xing-zhe (Faculty of Material and Chemical Engineering,Southern Institute of Metallurgy,Ganzhou 341000,China)

【机构】 南方冶金学院材料与化学工程学院南方冶金学院材料与化学工程学院 江西赣州341000江西赣州341000江西赣州341000

【摘要】 采用X射线衍射仪和扫描电镜分析Al2O3/Al-Si复合材料的凝固组织,发现界面处有Cu2Mg富集;Al-Si合金能很好地润湿Al2O3纤维,Al-Si合金与Al2O3纤维形成了共格、半共格混合界面;随着冷却速度的降低,界面偏析严重,没有界面产物。

【Abstract】 The solidification microstructures of Al2O3/Al-Si alloy matrix composite is examined by means of TEM and XRD,and it is found that there is accumulation of Cu2Mg at the interface.The analysis of tensile fracture shows that Al-Si alloy wets alumina fibers very well,and that coherent and semicoherent mixed interface is formed.With the decreasing of the cooling rate,the interface segregation become more graveness,but interface product is not found.

  • 【文献出处】 轻合金加工技术 ,Light Alloy Fabrication Technology , 编辑部邮箱 ,2004年03期
  • 【分类号】TB331
  • 【被引频次】5
  • 【下载频次】124
节点文献中: 

本文链接的文献网络图示:

本文的引文网络