节点文献

耐候钢表面锈层稳定化处理用新型涂层研究

A NEW COATING STABILIZING SURFACE RUST OF WEATHERING STEEL

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘丽宏李明李晓刚卢燕平齐慧滨

【Author】 LIU Lihong, LI Ming, LI Xiaogang, LU Yanping,QI Huibin1) Corrosion and Protection Center, University of Science and Technology Beijing, The Key Lab of Corrosion, Erosion and Surface Technology of Beijing, Beijing 1000832) Industry Equipment and Information Engineering Center, Beijing Chemical Industry Press, Beijing 100029

【机构】 北京科技大学腐蚀与防护中心北京市腐蚀、磨蚀与表面技术开放实验室北京市腐蚀、磨蚀与表面技术开放实验室 北京 100083北京化工出版社工业装备与信息工程出版中心北京 100029北京 100083北京 100083

【摘要】 针对耐候钢裸露使用时出现的锈层稳定化时间过长及早期锈液流挂和飞散的问题,提出了Zn—Ca系磷化+丙烯酸树脂-SiO2复合膜新型耐候钢表面锈层稳定化处理技术.采用干湿周浸实验研究了该复合膜耐候钢试样的腐蚀行为和耐大气腐蚀性能.得出了能有效避免锈液流挂、促进耐候钢表面锈层稳定化的最佳复合膜处理工艺,即Zn-Ca磷化+B-13Si(120℃)复合膜处理.并从理论上探讨了该复合膜提高耐候钢抗大气腐蚀性能、促进表面锈层稳定化的作用机理和模型.

【Abstract】 A new coating, Zn-Ca phosphating /acrylic resin-SiO2 (B-Si) composite films, was put forward, which can stabilize the surface rust of weathering steel. The wet and dry cycle immersion test was used to evaluate the corrosion resistance of this compound film. It was found that the optimum technology is Zn-Ca phosphating/B-13Si (120 ℃). It is efficient not only to avoid the liquid rust to flow and distribute but to promote the formation of stabilized rust layer. Furthermore, the mechanisms of the presented coatings to improve the corrosion-resisting property and to accelerate the formation of stabilized rust of weathering steel at atmosphere were also discussed.

【基金】 国家重点基础研究发展规划项目G19990650;国家自然科学基金项目50171011资助
  • 【文献出处】 金属学报 ,Acta Metallrugica Sinica , 编辑部邮箱 ,2004年11期
  • 【分类号】TG178
  • 【被引频次】22
  • 【下载频次】498
节点文献中: 

本文链接的文献网络图示:

本文的引文网络