节点文献
A位取代对钨镁酸铅微波性能的影响
EFFECT OF A-SITE SUBSTITUTION ON MICROWAVE PROPERTIES OF LEAD MAGNESIUM TUNGSTATE
【摘要】 研究了La3+改性钨镁酸铅陶瓷材料的烧结性能、微观结构以及微波介电性能。结果发现:加入La3+的摩尔分数大于50%时,在A位 形成有序的空位,并形成单相的钨镁酸铅镧钙钛矿相。La3+的加入,降低了介电常数,提高了微波性能,同时温度系数显著降低。当 x(La3+)=56%时,得到较好微波性能:εr=28.7,Q·f=18 098GHz,τcf=-5.8×10-6/℃。
【Abstract】 Pb(Mg1/2 W1/2 )O3 modified by La3+ was prepared by solid state reaction process. The sintering behavior, microstructure and microwave dielectric properties were investigated by X-ray powder diffraction and HP network analyzer. It is found that a single phase perovskite type solid solutions with ordered vacancies on A-site, [Pb1-x Lax (Mg1/2 W1/2)O3 (0≤x≤67%)] were formed in the whole mixing range when the molar fraction of La3+ was higher than 50%. The dielectric constant and temperature coefficient decrease with the increase of La3+ content. Better integrated microwave dielectric properties were obtained when x=56% , εr= 28.7, Q f=18098GHz, and τcf=-5.8×10-6/℃.
【Key words】 lead magnesium tungstate; complex perovskite structure; antiferroelectrics; microwave dielectric ceramic;
- 【文献出处】 硅酸盐学报 ,Journal of The Chinese Ceramic Society , 编辑部邮箱 ,2004年01期
- 【分类号】TQ174
- 【被引频次】5
- 【下载频次】137