节点文献

基于神经网络的热带层流基本热流密度的计算

CALCULATION OF BASIC HEAT-FLUX DENSITY FOR HOT STRIP LAMINAR-COOLING SYSTEM USING ARTIFICIAL NEURAL NETWORKS

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 韩斌; 彭良贵; 王国栋; 刘相华; 焦景民; 佘广夫; 张中平;

【Author】 HAN Bin 1, PENG Lianggui 1, WANG Guodong 1, LIU Xianghua 1, JIAO Jingmin 2, SHE Guangfu 2, ZHANG Zhongping 2 (1.State Key Laboratory of Rolling and Automation,Northeastern University,Shenyang 110004; 2.Hot Strip Mill of Panzhihua Iron and Steel Group Co.,Panzhihua 617062)

【机构】 轧制技术及连轧自动化国家重点实验室(东北大学); 攀枝花钢铁(集团)公司热轧厂; 攀枝花钢铁(集团)公司热轧厂 沈阳110004; 沈阳110004; 攀枝花617062; 攀枝花617062;

【摘要】 利用现场的数据 ,采用 BP神经元网络预报热连轧层流水冷区集管组内的基本热流密度 ,将预报的结果用于上、下集管组的热流密度的数学模型计算 ,进而优化层冷集管组的水冷温降计算数学模型的精度。将结果与采用多元回归方法所得到的结果作比较 ,表明采用 BP神经元网络计算基本热流密度的精度要高于多元回归方法的计算精度 ,卷取温度的计算值与实测值的标准差比解析回归方法减少了近 2 0 % ,说明该方法具有良好的在线应用前景。

【Abstract】 By use of BP neural networks the basic heat-flux density for laminar cooling system of hot strip mills was predicted on the basis of measured date,the result was then applied to calculate the top and bottom heat-flux density for cooling banks to improve the precision of calculation of temperature drop in each bank.In the mean time the basic heat-flux density was calculated by using traditional linear analytical regression program.The results showed that the calculation precision of neural networks is higher than that of analytical method,The standard deviation between the predicted and measured coiling temperature was reduced about 20 %.

【基金】 国家自然科学基金资助项目 (5 0 10 40 0 4
  • 【分类号】TG335.11
  • 【被引频次】17
  • 【下载频次】268
节点文献中: 

本文链接的文献网络图示:

本文的引文网络