节点文献

不锈钢纤维表面状态对铺毡均匀性的影响

INFLUENCE OF SURFACE STATE OF STAINLESS STEEL FIBER ON HOMOGENEITY OF STAINLESS STEEL FIBER FELT

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 郭萍杨延安张健白文峰奚正平

【Author】 Guo Ping~(①②), Yang Yan’an~①, Zhang Jian~①, Bai Wenfeng~①, Xi Zhengping~(①②) (①Northwest Institute for Nonferrous Metal,Xi’an 710016,China) (②Xi’an University of Architecture& Technology,Xi’an 710055,China)

【机构】 西北有色金属研究院西北有色金属研究院 西安710016西安建筑科技大学西安710015西安710016西安710016西安建筑科技大学西安710015

【摘要】 本文主要研究了 6 μm、8μm不锈钢纤维不同表面性状对铺毡均匀性的影响 ,分别比较了 6 μm、8μm不锈钢平直纤维、卷曲纤维和改性纤维铺毡的均匀性。结果表明 :8μm金属纤维比 6 μm金属纤维成网连续且均匀 ;同一丝径 ,卷曲纤维和改性纤维比平直纤维成网连续且铺毡均匀。同时毡的均匀性还与喂给纤维的预开松状态及连续程度有关

【Abstract】 The effects of different surface properties for 6μm and 8μm stainless steel fiber on homogeneity of rolling-out have been studied.The comparison of the homogeneity of 6μm and 8μm stainless steel straight fiber,curled fiber and modified fiber was made.The results show that the webbing of 8μm fiber is more symmetrical than that of 6μm.For the same -diameter fiber,the webbing of curled fiber and modified fiber is better than that of straight fiber.The homogeneity of fiber felt is correlative with fiber states of beforehand loosing and Continuity.

【基金】 国家高技术研究发展计划 ( 863 )专项经费资助 ( 2 0 0 1AA3 2 70 70 )
  • 【文献出处】 粉末冶金工业 ,Powder Metallurgy Industry , 编辑部邮箱 ,2004年03期
  • 【分类号】TG115
  • 【被引频次】1
  • 【下载频次】140
节点文献中: 

本文链接的文献网络图示:

本文的引文网络