节点文献

溶胶-凝胶法制备小颗粒(Y,Gd)BO3∶Eu及其表征

Preparation of Small-sized (Y,Gd)BO3∶Eu Phosphors by Sol-gel Process and Their Characterization

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 蒋凯余兴海叶明新黄玮石黄京根

【Author】 JIANG Kai, YU Xing-hai, YE Ming-xin, HUANG Wei-shi, HUANG Jing-gen (Department of Materials Science, Fudan University, Shanghai 200433, China)

【机构】 复旦大学材料科学系复旦大学材料科学系 上海200433上海200433上海200433

【摘要】 用溶胶 凝胶方法制备了平均粒径为 1~ 2 μm的小颗粒、高发射效率的 (Y ,Gd)BO3 ∶Eu红色发射荧光体。用XRD、SEM、粒度分析和PL光谱对荧光体作了表征和研究。常规固相反应合成 (Y ,Gd)BO3 ∶Eu需在 1 2 0 0℃以上才能形成均一的固溶体。而溶胶 凝胶法制取稀土正硼酸盐 80 0℃灼烧已可形成均一的单相 (Y ,Gd)BO3 ∶Eu,在 1 1 0 0℃可得到发光亮度最高的荧光体。它的亮度是常规固相反应于 1 2 0 0℃制得的荧光体的 1 2 0 %。采用溶胶 凝胶法制取 (Y ,Gd)BO3 ∶Eu荧光体 ,可在相当宽的实验条件范围内得到小粒径、窄分布和高亮度的荧光体 ,且有良好的颗粒形貌。

【Abstract】 Red emitting phosphors (Y, Gd)BO3∶Eu, with mean size of 1~2 μm were prepared by a sol-gel process combined with a furnace firing. For the sol-gel procedure, tri-n-butyl borate B(OC4H93 was mixed and stirred with a nitric solution of Y2O3, Gd2O3, Eu2O3 having a mole proportion of 0 45∶0 50∶0 05 in ethanol. The (Y, Gd, Eu)BO3 gel precursor prepared from solution was sintered at a certain temperature range of 800~1 200 ℃. The prepared orthoborates were characterized with X-ray diffraction, scanning electron microscopy and photoluminescence. Conventional solid state reactions require higher sintering temperatures above 1 200 ℃ for pure (Y, Gd)BO3∶Eu phase. However, the sol-gel process allows a significant decrease of the sintering temperature and the phosphor sintered at 800 ℃ had pure orthoborate phase. The effect of preparation conditions such as amount of B(OC4H93 and sintering temperature on the crystallinity, morphology and luminescence characteristics of phosphor particles were investigated. The results show that 10%~20% excess of B(OC4H93 is favorable to get pure orthoborate phase and control the morphology of particles. Also, the particle size and VUV luminescence of phosphors are dependent on sintering temperature. The particles obtained by sintering at 1 000 and 1 100 ℃ had narrow distribution and the aggregation of particles appeared at 1 200 ℃. The PL intensity of the phosphor prepared by sol-gel process reached the maximum value at 1 100 ℃ and was 20% higher than that of the phosphor prepared at 1 200 ℃ by conventional solid state reaction. By sol-gel process, small-sized (Y, Gd)BO3∶Eu with narrow distribution, high luminescent efficiency and good morphology can be prepared in a wide range of reaction condition.

【关键词】 正硼酸盐溶胶凝胶法等离子体显示板荧光粉
【Key words】 orthoboratesol-gel processPDPphosphor
【基金】 唐仲英科技创新基金资助项目 (B1 710 )
  • 【文献出处】 发光学报 ,Chinese Journal of Luminescence , 编辑部邮箱 ,2004年01期
  • 【分类号】TN873
  • 【被引频次】42
  • 【下载频次】486
节点文献中: 

本文链接的文献网络图示:

本文的引文网络