节点文献

千兆以太网高速分接集成电路设计

Design of High Speed DEMUX IC in Gigabit Ethernet

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 沈桢朱恩赵文虎王志功

【Author】 Shen Zhen, Zhu En, Zhao Wenhu, Wang Zhigong (Southeast University, Nanjing, 210096, China)

【机构】 东南大学射频与光电集成电路研究所东南大学射频与光电集成电路研究所 江苏省南京市210096江苏省南京市210096江苏省南京市210096

【摘要】 研究了千兆以太网接收系统结构 ,在此基础上设计了千兆以太网的分接芯片 ,采用0 .2 5 μmCMOS工艺设计的千兆网分接电路实现了 1.2 5Gbit s数据的 1∶10串 并转换 ,芯片核心面积4 70 μm× 32 0 μm ,在输入摆幅为 5 0 0mV、输出负载 5 0Ω条件下 ,输出 12 5Mbit s数据峰峰值是 82 8mV ,抖动有效值为 10ps ,眼图占空比为 4 1.5 % ,输出信号上升沿为 9ps。电源为 3.3V时功耗仅为 16 1mW。

【Abstract】 Based on the researching of gigabit Ethernet demultiplexer structure, The receiver chips used for Gigabit Ethernet are designed. The gigabit Ethernet receiver chips produced by 0.25 μm CMOS process have the function of 1∶10 demultiplexing and can operate at 1.25 Gbit/s, and its core area is 470 μm×320 μm. Under the condition of 500 mV input swing and 50 Ω output load,the peak to peak voltage of 125 Mbit/s output signal is 828 mV, and the rising time is 9 ps , RMS jitter is 10 ps. The power consumption is only 161 mW with 3.3 V supply voltage.

【关键词】 千兆以太网分接芯片CMOS工艺
【Key words】 gigabit EthernetDEMUX chipCMOS process
  • 【文献出处】 电子工程师 ,Electronic Engineer , 编辑部邮箱 ,2004年01期
  • 【分类号】TN402
  • 【被引频次】1
  • 【下载频次】76
节点文献中: 

本文链接的文献网络图示:

本文的引文网络