节点文献
无压及热压烧结法制备Ce-TZP/Al2O3复相陶瓷材料
Pressureless and hot-pressing sintering of Ce-TZP/Al2O3 composite ceramics
【摘要】 研究了无压和热压烧结Ce-CP/Al2O3陶瓷材料组织和性能。结果表明,热压烧结时,材料在1400℃,保温1h的条件下达到充分致密,此时相对密度为98.6%,这一结果与热压过程中的外加压力大大促进材料的致密化有关;而无压烧结时,材料达到充分致密化的温度为1500℃,相对密度为97.5%。另外,同无压烧结的样品相比,热压样品的微观组织细小,综合力学性能优良。
【Abstract】 The microstructures and mechanical properties of Ce - TZP/Al2O3 ceramics prepared by pressureless and hot -pressing sintering were investigated. It was shown that, the hot - pressed samples with a relative density of 98.6% reachedfull densification at sintering temperature of 1400℃, holding time of 1h and pressure of 20MPa, this result was attributed tothe external pressure promoting and accelerating the process of densification, whereas the pressureless - sintered samples witha relative density of 97.5% were fully densified at 1500℃, additionally, the mechanical properties of the hot - pressedsamples with fine grains were better than that of pressureless samples.
【Key words】 Ce - TZP/Al2O3 ceramics; full densification; pressureless - sintering; hot - pressing sintering;
- 【文献出处】 兵器材料科学与工程 ,Ordnance Material Science and Engineering , 编辑部邮箱 ,2004年03期
- 【分类号】TB332
- 【被引频次】5
- 【下载频次】164