Dry sliding wear of Ti-6Al-4V alloy in air and vacuum

【Abstract】 Differences in wear rate, morphology of the worn surface and debris, and the microstructure in subsurface of the Ti 6Al 4V alloy after wear in air and vacuum were compared. The wear rate of Ti 6Al 4V alloy in air is higher than that in vacuum in all the ranges of sliding velocities and applied loads. The wear of Ti 6Al 4V alloy in air is controlled by a combination of abrasion, oxidation and delamination with micro cracks remaining in subsurface. Under the vacuum condition, the surface layer of Ti 6Al 4V alloy experiences a severe plastic deformation on a great scale, which results in an ultra fine microstructure.更多还原