节点文献

30CrMnSiA钢激光表面淬火的显微组织及耐磨性

Microstructure and Wear Resistance of Laser Hardening Layer on 30CrMnSiA Steel

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘丽吴东江李守春庄娟王连元

【Author】 Liu Li 1, Wu Dongjiang 2, Li Shouchun 1 , Zhuang Juan 1 ( 1Teaching and Study Center of Physics,Jilin University,Changchun 130026,; 2 Ddta Storage Institute National University Of Singapore,Singapore 117608)

【机构】 吉林大学物理教学与研究中心新加坡国立大学数据存储研究所吉林大学物理教学与研究中心 长春130026新加坡117608长春130026长春130026

【摘要】 采用功率为 2kW ,扫描速度为 10 0mm/min的工艺参数对钻杆接头材料 30CrMnSiA钢进行了表面相变硬化处理 ,研究了相变层的组织和耐磨性。实验结果表明 ,30CrMnSiA钢表面相变硬化层分为完全淬硬层、过度层和受热影响的基体组织 ,硬化层的显微组织明显细化 ,其表面层的耐磨性明显高于未经激光处理的 30CrMnSiA钢。

【Abstract】 Surface hardening of drill-stem joint material 30CrMnSiA by using 2kW power and 100mm/min scanning velocity has been performed, The microstructure and wear resistance of the transformation layer have been studied ,The experimental results show that the surface hardened layer consists of the hardened region and the interim region and the temper microstructure,The microstructure of hardened layer was very tiny,Its wear resistance higher than the 30CrMnSiA steel in the normal state

【基金】 地质矿产部青年地质学家基金资助项目(Qn979819)
  • 【分类号】TG156.99
  • 【被引频次】26
  • 【下载频次】292
节点文献中: 

本文链接的文献网络图示:

本文的引文网络