节点文献

压阻式金刚石压力微传感器的制作与测试

Fabrication and Test of the Piezoresistive Diamond Pressure Microsensor

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 凌行莘海维张志明孙方宏戴永兵沈荷生

【Author】 LING Xing,XIN Haiwei,ZHANG Zhiming,SUN Fanghong,DAI Yongbing,SHEN Heshen(Institute of Microelctronic Technology,Shanghai Jiaotong University,Shanghai 200030,China)

【机构】 上海交通大学微电子技术研究所上海交通大学微电子技术研究所 上海200030上海200030上海200030

【摘要】 由于金刚石薄膜具有优良的高温压阻特性,适合于制作高温压力传感器。在Φ50mm〈100〉硅单晶衬底上用热丝CVD法生长本征多晶金刚石薄膜作为绝缘隔离层,通过掩模选择性生长法得到掺硼金刚石薄膜电阻条,再经金属化处理和腐蚀硅压力腔,得到了压阻式金刚石压力微传感器的原型器件。对该器件的压力输出特性测量表明,输出电压—压力曲线线性较好,重复性好,常温下灵敏度高。

【Abstract】 Due to its superior hightemperature piezoresistive characteristics,diamond film is very suitable for the fabrication of hightemperature pressure sensor. The fabrication and the test of the diamond pressure microsensor have been discussed. Using intrinsic polycrystalline diamond films,which were grown on 50 mm silicon substrate by means of HFCVD,as isolation layer, selective area deposition technology to prepare the Borondoped diamond films resistors, and followed with metalization and pressure cavities etching,the piezoresistive diamond pressure microsensor prototype devices have been obtained successfully. The measurements of their output characteristics show that the devices have good linearity and repeatability and high sensitivity at the room temperature.

【基金】 国家863计划新材料领域纳米专项资助项目(2002AA302613);上海市科技发展基金纳米专项资助项目(0159nm033);上海交通大学教育部薄膜与微细技术重点实验室资助项目
  • 【文献出处】 微细加工技术 ,Microfabrication Technology , 编辑部邮箱 ,2003年02期
  • 【分类号】TP212
  • 【被引频次】11
  • 【下载频次】202
节点文献中: 

本文链接的文献网络图示:

本文的引文网络