节点文献

电弧炉冶炼工艺对钢液氮含量的影响

Effect of Arc Furnace Operation Technology on Nitrogen Content in Molten Steel

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 王经民林国强李京社李晶唐国志傅杰

【Author】 Wang Jingming and Lin Guoqiang (Nanjing Iron and Steel Group Co Ltd, Nanjing 210038) Li Jingshe, Li Jing, Tang Guozhi and Fu Jie (Metallurgy School, University of Science and Technology, Beijing 100083)

【机构】 南京钢铁集团有限公司北京科技大学冶金学院北京科技大学冶金学院 南京210038南京210038北京100083教授北京100083

【摘要】 根据现场试验结果 ,分析了南钢 1 0 0t电弧炉冶炼工艺对钢液氮含量的影响 ,结果表明 :对同一批废钢 ,随着铁水加入量的增加 ,出钢钢液氮含量下降 ;出钢过程加铝脱氧则增加钢液吸氮量

【Abstract】 Based on the test results in situ, the effect of steelmaking technology of an 100 t arc furnace at Nanjing Iron and Steel on nitrogen content in molten steel has been analyzed. The test results showed that with same batch of scrap, the nitrogen content in tapping steel decreased with increasing hot metal charging amount, and the absorbing nitrogen amount of molten steel from atmosphere increased while the molten steel was deoxidized by adding Al during tapping.

【关键词】 电弧炉炼钢氮含量
【Key words】 Arc FurnaceSteelmakingNitrogen Content
  • 【分类号】TF741
  • 【被引频次】1
  • 【下载频次】154
节点文献中: 

本文链接的文献网络图示:

本文的引文网络