节点文献

保温对低碳钢形变诱导相变组织的影响

Influence of Holding Time on Microstructure of Strain Induced Transformation in Low Carbon Steel

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘翠琴李维娟王国栋刘相华

【Author】 LIU Cui-qin 1, LI Wei-juan 1, WANG Guo-dong 2, LIU Xiang-hua 2 (1. School of Mater. Sci.& Eng., Anshan Science and Technology University, Anshan 114002,China; 2. The National Key Laboratory of Rolling Technology and Automatic Continuous Rolling, Northeast University,Shenyang 110006,China)

【机构】 鞍山科技大学材料科学与工程学院东北大学轧制及连轧自动化国家重点实验室东北大学轧制及连轧自动化国家重点实验室 辽宁鞍山114002辽宁鞍山114002辽宁沈阳110006辽宁沈阳110006

【摘要】 通过热模拟实验 ,考察了不同变形温度和不同奥氏体晶粒尺寸等条件下保温对低碳钢形变后组织演变的影响。结果表明 ,在较低的温度下变形得到的铁素体在保温时更稳定 ,随温度升高 ,易发生铁素体向奥氏体的逆相变。细晶奥氏体转变后的铁素体在保温时长大缓慢 ,所得组织稳定 ,并且保温后的组织也更为均匀

【Abstract】 The influence of the holding time in different conditions of deforming temperature as well as primal austenite grain sizes on the microstructure of transformation were investigated. The results suggested that ferrite grains obtained at lower deforming temperature were more stable during holding, the reverse transformation from ferrite to austenite tended to happen at a higher temperature. Ferrite transformed from finer austenite grains grew not as distinctly as those from coarser austenite grains, and the microstructure were more homogenous after holding for some time.

  • 【文献出处】 热加工工艺 ,Hot Working Technology , 编辑部邮箱 ,2003年03期
  • 【分类号】TG142
  • 【被引频次】9
  • 【下载频次】194
节点文献中: 

本文链接的文献网络图示:

本文的引文网络