节点文献

含氨废水处理技术及工艺设计方案

TREATMENT TECHNOLOGY FOR WASTE WATER CONTAINING AMMONIA AND INDUSTRIAL DESIGN

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 胡继峰刘怀

【Author】 HU Jifeng (School of Chemistry and Environment Science, Nanjing Normal University, Nanjing 210097,China)

【机构】 南京师范大学化学与环境科学学院东南大学自动化研究所 江苏南京 210097江苏南京 210096

【摘要】 本文根据氮肥厂废水的特点,研究了高浓度氨氮废水的处理方法-吹脱法的除氨机理和氨氮去除率的影响因素。针对pH值和温度对氨氮去除率的影响,我们做了实验,结果表明若去除率要达到90%以上,pH值必须大于12且温度高于90℃。同时可以用CaO将废水的pH值调节到12以上。最后,针对这种废水的处理设计了可行的工艺方案。

【Abstract】 According to the characteristic of the waste water from nitrogenous fertillzer factory, the treatment method of ammonia-nitrogen waste water will high concentration, nitrogen removal mechanism of blow-denitrogenation and the affecting factors for ammonia-nitrogen removal were studied. In view of the influence of pH value and temperature on the removal rate of ammonia-nitrogen, the authors the experiment, the results showed that if the removal rate reaches to over 90%, pH value must be greater than 12, and temperature must be higher than 90℃; pH value can be adjusted over 12 with CaO. Finally, a feasible technologyical scheme was designed for the wastewater treatment.

【关键词】 废水处理氨氮吹脱法
【Key words】 waste water treatmentammonia nitrogenblow-denitrogenation
  • 【文献出处】 水处理技术 ,Technology of Water Treatment , 编辑部邮箱 ,2003年04期
  • 【分类号】X703.1
  • 【被引频次】78
  • 【下载频次】1006
节点文献中: 

本文链接的文献网络图示:

本文的引文网络