节点文献

疲劳试验对两种口腔树脂的黏接耐久性研究

A Study on Durability of Adhesion of Two Dental Resins by Fatigue Testing

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 冯翠娟包扬艾红军永井正洋宫入裕夫安田登

【Author】 FENG Cuijuan, BAO Yang, AI Hongjun , et al.( Department of Prosthodontics , Affiliated Stomatological Hospital, China Medical University, Shenyang 110002, China)

【机构】 中国医科大学口腔医院口腔修复科东京医科齿科大学生体材料研究所东京医科齿科大学生体材料研究所 沈阳 110002沈阳 110002东京东京

【摘要】 目的 评价两种口腔黏接性树脂 Super-Bond C & B(SB)和 Panvia 21(PV)的黏接耐久性。方法 双臂牵张试验检测SB和 PV的 Mode Ⅰ破坏韧性,研究疲劳试验的影响。结果 SB的破坏韧性值(Gmax)与振动次数N的对数成近似直线的关系;而PV的Gmax分散度大,观察不到明显的趋势。结论 SB的破坏韧性值经疲劳试验后,有下降趋势,而PV的变化趋势不显著。Gmax可作为SB的损伤容许值,在需控制义齿疲劳寿命的修复设计中是有效的。

【Abstract】 Objective To evaluate the durability of adhesion of dental adhesive resins such as Super- bond C&B (SB) and Panavia 21 (PV). Methods The effect of fatigue testing at a frequency of 1 Hz on Mode I fracture toughness was studied with the double cantilever beam (DCB) testing. Results In the case of SB, the relation between fracture toughness (Gmax) and number of cycles (N) on a log scale was approximated with a linear equation. In the case of PV, no such tendency was observed because the data of Gmax were widely scattered in the Gmax- N diagram. Conclusion SB was significantly influenced by fatigue test. However, the effect on PV was small. In the case of SB, the Gmax, which might be considered as the allowed value of frature for an adhesive, was effective for a dental prosthetic design which allowed control of the fatigue life.

  • 【分类号】R783.1
  • 【被引频次】8
  • 【下载频次】93
节点文献中: 

本文链接的文献网络图示:

本文的引文网络