节点文献

冷却速度对20 Mn2Si1 VB贝氏体钢显微组织和力学性能的影响

Effect of Cooling Rate on Microstructure and Mechanical Properties of 20Mn2Si1VB Bainite Steel

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张雁鄂蓓霍颜秋吴化刘云旭

【Author】 ZHANG Yan,E Pei,HUO Yan qiu,WU Hua,LIU Yun xu (Materials Science and Technology College,Changchun University of Technology,Changchun Jilin 130012,China)

【机构】 长春工业大学材料科学与工程学院长春工业大学材料科学与工程学院 吉林长春130012吉林长春130012吉林长春130012

【摘要】 研究了 2 0Mn2Si1VB空冷贝氏体钢在高温奥氏体化后冷却速度对显微组织和力学性能的影响。结果表明 ,该钢在 80 0℃~ 5 0 0℃获得贝氏体组织的平均冷却速度为 0 5℃ /s~ 10 0℃ /s ;随冷却速度不同 ,贝氏体组织中所含粒状贝氏体、无碳化物贝氏体和低碳下贝氏体的含量也不相同 ,但其对强度和塑性影响不大

【Abstract】 The effect of cooling rate on microstructure and mechanical properties of 20Mn2Si1VB bainite steel after austenization was studied in this paper.The results show that the average cooling rate of the bainite microstructure at 800℃~500℃ are 0 5℃/s~10 0℃/s.The component of granular bainite,carbide free bainite and low carbon lower bainite in the bainite varies with different cooling rate.However,the cooling rate has a little influence on the strength and the plastic behaviour.

  • 【文献出处】 金属热处理 ,Heat Treatment of Metals , 编辑部邮箱 ,2003年10期
  • 【分类号】TG142.2
  • 【被引频次】5
  • 【下载频次】218
节点文献中: 

本文链接的文献网络图示:

本文的引文网络