节点文献

3Cr2 W8V钢热锻模具淬火开裂原因分析

Analysis on the Quenching-Cracking for Hot-Forging Die Made of 3Cr2W8V Steel

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 孙维连王成彪

【Author】 SUN Wei lian 1,2 ,WANG Cheng biao 1(1.Institute of Engineering Technology,Geology Science University of China,Beijing 100083,China;2.Institute of Mechanical and Electrical Engineering,Agricultural University of Hebei,Baoding Hebei 071001,China)

【机构】 中国地质大学工程技术学院河北农业大学机电工程学院 北京100083河北农业大学机电工程学院河北保定071001河北保定071001

【摘要】 分析了 3Cr2W 8V钢热锻模具淬火开裂原因。借助于扫描电镜和光学显微镜 ,观察断口表面形貌和金相组织 ,根据断口特征和金相组织找出了模具淬火断裂主要原因是晶粒粗大、碳化物呈带状分布、锻造后未按要求退火细化晶粒 ,导致模具按正常温度淬火发生断裂

【Abstract】 The reason of quenching cracking for hot forging die steel 3Cr2W8V was analyzed.The fracture surfaces and metallurgical microstructure were observed by means of the scanning electron microscope and optical microscope.According to the fracture surfaces and metallurgical microstructure,it is found that the fracture of the die is caused by the forging defect,such as coarse grain,band distributed carbide,and not being annealed rightly after forging,when it was quenched at normal temperature.

【关键词】 3Cr2W8V钢热锻模具开裂失效分析
【Key words】 Cr2W8V steelhot forging diecrackingfailure analysis
  • 【文献出处】 金属热处理 ,Heat Treatment of Metals , 编辑部邮箱 ,2003年06期
  • 【分类号】TG162.4
  • 【被引频次】7
  • 【下载频次】191
节点文献中: 

本文链接的文献网络图示:

本文的引文网络