节点文献

用天然粉石英配制熔模铸造面层涂料

Prepare the Surface Coat Paint of Lost-wax Molding by Natural Powdery Quartz

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 康林萍杨晓峰张胜来程求荣

【Author】 KANG Lin_ping1,YANG Xiao_feng2,ZHANG Sheng_lai2,CHEN Qiu_rong2 (1.The Institute of Applied physics of Jiangxi Academy of Sciences,Nanchang 330029 PRC; 2.Jiujiang Chemical Fibre Plant,Jiujiang 332017 PRC)

【机构】 江西科学院应用物理研究所九江化纤厂九江化纤厂 南昌 330029九江 332017九江 332017

【摘要】 粉石英SiO2含量高(98.7%~99.3%),Fe2O3含量低(0.03%~0.04%),价格约为人工石英粉的一半,用它和水玻璃配制的面层料涂片重量较轻(0.47~0.52g),铸件表面粗糙度Rz>40μm。经过对天然粉石英的淘洗工艺和颗粒组成的反复研究,做了大量的工艺试验,最后确定了一种性能较好的粉料。可使涂片重达到0.8g以上,铸件的粗糙度也得到了改善(Rz为13.9~24.65μm)。

【Abstract】 In natural powdery Quartz the content of SiO2 is high 98.7%~99.3%,but the content of Fe2O3 is low 0.03%~0.04%.Its price is a half of the price of artificial quartz powder.The smear of paint prepared with natural powdery quartz and water grass is lighter 0.47~0.52 g.The roughness of cast surface R2 is smaller than 40 μm.Through repeated research of elutration technology of natural powdery quartz and its grain composition and a lot of technological tests,a powdered material with better performance is obtained finally so as to make the weight of smear reach over 0.8 g and the plainness of cast surface improved(R2 is from 13.9 to 24.65 μm).

  • 【分类号】TG221
  • 【被引频次】1
  • 【下载频次】115
节点文献中: 

本文链接的文献网络图示:

本文的引文网络