节点文献

珍珠岩抛光磨料制备技术研究

RESEARCH ON WET PREPARATION TECHNIQUE OF PERLITE FINISHING ABRASIVE GRITS

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘新海沈上越李一波杨友生李珍杨欣剑

【Author】 Liu Xinhai 1,2 Shen Shangyue 1 Li Yibo 2 Yang Yousheng 2 Li Zhen 1 Yang Xinjian 2(1. China University of Geosciences Wuhan 430074)(2. Zhengzhou Institute of Multipurpose Utilization of Mineral Resources. CAGS Zhenzghou 450006)

【机构】 中国地质大学研究生院中国地质科学院郑州矿产综合利用研究所中国地质科学院郑州矿产综合利用研究所 武汉430074郑州450006武汉430074郑州450006

【摘要】 本文提出一种湿法制备技术利用珍珠岩尾矿制备珍珠岩抛光磨料。与传统干法工艺相比 ,珍珠岩抛光磨料产品产率从 3 0 %提高到 70 %以上 ,颗粒粒度百分之百小于 15 0 μm ,而 0 -4 4μm粒级含量不到 10 %。粒度分布更加合理 ,完全满足玻壳行业及相关行业的要求。湿法制备珍珠岩抛光磨料是珍珠岩加工业充分合理利用珍珠岩尾矿的十分有效的利用途径。

【Abstract】 A wet preparation method was suggested to produce perlite abrasive grits from perlite tailings. The ouput rate of the abrasive grits by the new method increased to 75% compared to 30% by traditional dry process. The grit size was absolutely smaller than 150μm and the 0-44μm grade presented less than 10%, thus making the grit size distribution more reasonable and could meet the requirements of TV glass shell polising.

【关键词】 珍珠岩磨料粒度产率
【Key words】 perliteabrasivegrain sizeoutput rate
【基金】 国家科技攻关项目 (960 4 4 1 0 34);河南省重大科技公关项目 (971 1 4 0 2 0 1 ) :上天梯多种非金属矿综合利用研究
  • 【文献出处】 金刚石与磨料磨具工程 ,Diamond & Abrasives Engineering , 编辑部邮箱 ,2003年02期
  • 【分类号】TG73
  • 【被引频次】2
  • 【下载频次】92
节点文献中: 

本文链接的文献网络图示:

本文的引文网络