节点文献

二-(4-羟基丁基)四甲基二硅氧烷的合成研究

The Study on the Synthesis of Bis - (4 - hydroxylbutyl)tetramethyldisiloxane

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 游革新赵耀明刘海敏严玉蓉谭锡荣

【Author】 You Gexin Zhao Yaoming Liu Haimin Yan Yurong Tan xirong(Institute of Material Science and Engineering, South China University of Technology,Guangzhou City, Guangdong Province 510640, P. R.of China)

【机构】 华南理工大学材料科学与工程学院华南理工大学材料科学与工程学院 广州 510640广州 510640广州 510640

【摘要】 采用一步法以二甲基二氯硅烷、四氢呋喃和金属镁粉为原料,在碘乙烷和单质碘催化下合成二-(4-羟基丁基)四甲基二硅氧烷。产物温合物减压过滤,以除去镁盐。滤液无需蒸馏提纯,而直接水解,干燥,减压蒸馏,收集71℃/1333Pa馏份。还探讨和优化合成条件:四氢呋喃与二甲基二氯硅烷之摩尔比应大于3.5;Grignard反应停止后应继续加热回流1小时;蒸馏时系统压力为1333Pa。

【Abstract】 In this paper, using ethyl iodide (C2H5I) and iodine (12) as catalysts, bis - (4 - hydroxylbutyl) tetramethyldisiloxane was directly synthesized from dimethyldichlorosilane, tetrahydrofuran and powder of metal magnesium. The mixture of products was filtrated by a vacuum pump to remove the magnesium salt. Distillation of the filtration solution was not necessary in this method, but the solution could be directly hydrolyzed, then dried, distilled in vacuum and collected fraction at 71℃/1333Pa.The optimized conditions of the synthesis was discussed and concluded: 1) the molar ratios of tetrahydrofuran to dimethyldichlorosilane should be larger than 3.5; 2) the container for reaction should be continuosuly heated and refluxed for one more hour after Grignard reaction was halt: 3) the appropriate pressure of last vacuum distillation should be 1333Pa.

  • 【文献出处】 合成材料老化与应用 ,Synthetic Materials Aging and Application , 编辑部邮箱 ,2003年03期
  • 【分类号】O627.4
  • 【被引频次】7
  • 【下载频次】154
节点文献中: 

本文链接的文献网络图示:

本文的引文网络