【摘要】 拆卸序列是拆卸研究的重要内容,文章首先建立了产品的装配模型,然后提出采用基于割集的方法来生成产品的拆卸序列。其中,子装配体的拆卸可行性可以利用三维软件UG的二次开发来判断,从而提高了判断的准确性,减少了拆卸序列的数目。最后以圆珠笔为例进行验证,表明该方法的正确性和有效性。更多还原

【Abstract】 The disassembly sequence is the main content of disassembly researches. In this paper, the assembly model of products is established first,and then a method based on the cutsets to generate the disassembly sequence is proposed. The threedimensional software UG is adopted to judge the disassembly feasibility of subassembly,so the accuracy of the judgment is improved and the number of the disassembly sequence reduced. Finally the ball pen is taken as an example to demonstrate this method,which shows the correctness and validity of the method.更多还原