节点文献

铝热-离心法制备的铁镍基耐蚀合金的显微结构

MICROSTRUCTURE OF IRON-NICKEL ALLOY PRODUCED BY CENTRIFUGAL-SHS PROCESS

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 席文君周和平殷声赖和怡

【Author】 XI Wenjun1, 2, ZHOU Heping1, YIN Sheng2, LAI Heyi2 (1.Department of Materials Science and Engineering, Tsinghua University, Beijing 100084,China; 2.School of Materials Science and Engineering, University of Science and Technol ogy Beijing, Beijing 100083, China)

【机构】 清华大学材料科学与工程系北京科技大学材料科学与工程学院清华大学材料科学与工程系北京科技大学材料科学与工程学院北京科技大学材料科学与工程学院

【摘要】 研究了铝热-离心法制备的铁镍基合金内衬复合钢管的显微结构,分析了内衬层沿径向的成分分布。结果表明,铁镍合金内衬层与碳钢基体之间形成了一个宽约20μm的马氏体过渡区。内衬层合金元素的含量沿径向由内表面到外表面逐渐降低。铁镍合金铁素体区内有细小的AlNi3和AlNi析出物。

【Abstract】 The microstructure and composition distribution of the iron-nickel alloy lined layer in a composite steel pipe produced by centrifugal-SHS process were invest igated. The results showed that a martensitic transition region has been found b etween the iron-nickel layer and carbon steel matrix. A composition gradient of alloying elements exists in the iron-nickel alloy layer in the radial directio n of the composite pipe. The alloying element contents in the lined layer are hi gher near the inner surface than near the outside surface. The intermetallic com pounds AlNi3 and AlNi precipitate in the iron-nickel alloy.

  • 【文献出处】 复合材料学报 ,Acta Materiae Compositae Sinica , 编辑部邮箱 ,2003年04期
  • 【分类号】TG135
  • 【下载频次】130
节点文献中: 

本文链接的文献网络图示:

本文的引文网络