节点文献

通信总配线架过流保护用BaTiO3系PTCR热敏电阻器的研制

Preparation of BaTiO3-based Ceramic PTCR as Over-current Protector in MDFs

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘勇庄志强

【Author】 LIU Yong1, ZHUANG Zhi-qiang2 (1. Shunde Xieli Electronic Component Co., Ltd., Shunde 528308, China; 2. College of Material Science and Engineering, South China University of Technology, Guangzhou 510641, China)

【机构】 顺德市协力电子元件有限公司华南理工大学材料学院 广东顺德528308广东广州510641

【摘要】 针对总配线架小型化而提出的过流保护用PTCR热敏电阻器小型化的要求,研究和讨论了PTCR热敏电阻器配方材料组成和生产工艺对其性能的影响。根据行业标准YD/T 741—95,对通信总配线架过流保护用钛酸钡(BT)系PTCR热敏电阻器配方进行设计,以施主掺杂Y2O3的配方,研制出全部性能指标满足YD/T 741—95要求的、小型化过流保护用PTCR热敏电阻器。试验发现:采用掺杂Y2O3的配方,工艺稳定性好,适合大批量生产;所制备的PTCR热敏电阻器反应灵敏,耐电流强度大,阻值稳定性好。

【Abstract】 To meet the requirement of the miniaturization of MDFs, the PTCRs as over-current protector in MDFs must be minimized. The effects of the composition and manufacture technology of the PTCR ceramics on the its properties are discussed. The composition of BaTiO3(BT)-based ceramics was so designed as to meet the Chinese Industry Standard YD/T741—95. The BT-based ceramics was doped with Y2O3. The PTCR thermistor prepared exhibit high sensitivity, good over-current capacity and stability of resistance. They are suitable for large-scale production.

  • 【文献出处】 电子元件与材料 ,Electronic Components $ Materials , 编辑部邮箱 ,2003年09期
  • 【分类号】TN37
  • 【被引频次】2
  • 【下载频次】65
节点文献中: 

本文链接的文献网络图示:

本文的引文网络